Advantages of Xinyu Aluminum Enameled Wire

Talking about the strengths of Enameled aluminum wire and its application field. Aluminum enameled wire has the following advantages DC resistivity: The DC resistivity of the copper clad aluminum wire is about 1.45 times that of the pure copper wire; the resistance phase together, the copper clad aluminum wire component. Outstanding solderability: The copper clad aluminum wire has the same congruence as the pure copper wire because of its concentric coating of pure copper. Brazability, not special treatment like aluminum wire; together, copper clad aluminum wire has a thick copper layer to ensure that when painting. Light weight: The copper clad aluminum wire density is 1/2.5 of the pure copper wire of the same wire diameter, which is very useful for the component of the falling coil. Replacing copper wire with Shenzhou copper-clad aluminum wire can save at least 30% of the cost.

Copper clad aluminum enameled wire application field

200 Enameled Copper Wire

1. High frequency transformers and general transformers;

2, inductance, electromagnetic coil;

3. The motor includes motors with high environmental requirements such as household motors, various micro motors and compressors;

4. Special electromagnetic wires for audio coils and optical drives;

5. Electromagnetic wire for display deflection coil;

6. Electromagnetic wire for degaussing coil;

Notes on the use of aluminum enameled wire

aluminum enameled wire is a signal transmission, but it is now a power transmission. It is very simple to question, and the life of its goods will be greatly reduced. In fact, in the use of aluminum enameled wire, pay attention to the oxidation maintenance of the undercut wire to ensure the useful connection between copper and aluminum, can be used for a long time.

There are many areas in which copper-clad aluminum wire and copper-clad aluminum enamel bags cannot be used. However, in fact, many companies use transformers, which is very worrying. The worry of the use of copper clad aluminum wire is 2 points, the self-resistance is higher than that of the cross-section copper, and the temperature rise is doubtful; the easy oxidation of aluminum wire will further increase the wire resistance and avoid oxidation.

The most worrying is the copper and aluminum in the Copper Enameled Wire, the metallurgical connection often said in the industry, the reliability in the long-term application process, in the process of thermal expansion and contraction, copper and aluminum contact can Whether it can withstand testing, there is no real proof in the industry.

Machinery and Machine Affects the Quality of Enameled Wire

Xinyu Enameled Wire is coated with the corresponding lacquer solution on the outside of the conductor, and then evaporated by the solvent and the film is cured and cooled. The enameled wire can be divided into polyester enameled wire, polyester imide enameled wire, polyamide imide enameled wire, polyimide enameled wire, oily lacquer, acetal lacquer, polyurethane enameled wire, etc. according to the insulating varnish used. Sometimes it is also classified according to its special use, such as self-adhesive enameled wire, cold-resistant lacquer coated wire, etc.
220 Enameled Copper Wire

The earliest enameled wire is an oily enameled wire made of tung oil. The paint film has poor abrasion resistance and cannot be used directly in the manufacture of electric motor coils and windings. When used, it is necessary to add cotton yarn to wrap the layers. Later, the polyacetal acetal lacquer envelope was introduced, and its mechanical properties were greatly improved. It can be used directly for motor winding, and it is called high-strength enameled wire.

The enameled wire consists of two parts: a conductor and an insulating layer. The bare wire is annealed and softened, and then baked and baked. It is affected by factors such as raw material quality, process parameters, production equipment, environment, etc. It is not easy to produce products that meet the requirements of the standard and meet customer requirements. Therefore, the quality characteristics of the enamelled aluminum wire are different from the enamelled copper wire.

The quality of xinyu Enameled Copper Wire, although it depends to a large extent on the quality of raw materials such as paint, wire and the objective conditions of machinery and equipment, but if you do not carefully deal with a series of problems such as baking, annealing, speed, etc. Relationship, do not grasp the operational skills, do not carefully do the tour operations and parking collection operations, do not do a good job of hygiene, even if the objective conditions are good, can not produce high-quality enameled wire. Therefore, the decisive factor for making the enameled wire is the person, who is responsible for the operation.

Xinyu Enameled Copper Wire (Brief Introduction)

Xinyu-enameledwire is an industry and trade enterprise specialized in Enameled Copper Wire. In order to create pleasure puchasing experience for enameled wire loyal clients, the after-sale department strives to improve live support service and perfect customer service through a eries of communication tools. Fast delivery and 100% guarantee.

Enamelled copper wire is a copper wire coated with a liquid through a variety of varnish. It is based on product usage and resistant to heat up the product. In general, enamelled copper wire will be used in the electronics industry. It is used to produce electrical and electronic equipment of various types. For example, Transformer, Coil, Choke coil, Line filter, Reactor, Inductor, Motor, Generator, loud speaker, loud speaker, busbar and etc.

Type of Enamelled copper wire

130 Enameled Copper Wire

STANDARD :IEC 60317-34

DATE :26th,Jun.,2017

TYPE :QZ-2/130

SIZE : 0.250mm

155 Enameled Copper Wire

STANDARD : IEC 60317-3

DATE :16th,Jan.,2017

TYPE :QZY-2/155

SIZE :2.800mm

180 Enameled Copper Wire

STANDARD : IEC 60317-8

DATE :9th,Jan.,2017

TYPE :QZY-2/180

SIZE :1.400mm

200 Enameled Copper Wire

The product can work continuously under 200C and 220C.

Standard in accordance with : IEC 60317-13

220 Enameled Copper Wire

STANDARD : IEC 60317-13

DATE : 28th,Jun.,2017

TYPE :Q(ZY/XY)-2/220

SIZE : 1.400mm

Click xinyu-enameledwire.com for more details, or contact us if you has any question.